Is your Netgear router stuttering? Is the WiFi indicator on your computer, not visible? If you answered yes to both of these questions, you should modify the MTU settings on your Netgear router.

Trying to figure out what MTU stands for and how it can solve all of your internet woes? By the end of this post, you’ll have learned everything there is to know about the MTU settings on your Netgear router. So continue to read.

What is MTU and how does it work?

Maximum Transmission Unit (MTU) is a phrase used to describe how much data can be sent in a given amount of time The maximum transmission unit (MTU) of a network device is the largest data payload it can send. MTU size is set by default on all Netgear WiFi routers. Surely, the default MTU size was included with your router. You can do so by going to http://routerlogin.net or 192.168.1.1.

“Why should I even consider adjusting the MTU settings on my Netgear router?” you might be wondering. So, take a look at the instances below to see how adjusting your router’s MTU settings can benefit you:

When Should You Change the MTU Settings on a Netgear Router?

1. You aren’t getting the results you want from your internet connection.
2. Your Internet Service Provider’s end has certain troubles (ISP).
3. Your device’s performance has slowed as a result of VPN use.
4. When attempting to access the routerlogin.net admin page, you are experiencing difficulties. 
5. Certain websites are inaccessible to you.

If any of these conditions seeming familiar, it’s time to modify the MTU settings on your router right away.

Note: If you get stuck while attempting to alter the MTU settings on your Netgear router, please contact our technical specialists.

How do I Change the Netgear Router MTU Settings?

Follow the steps outlined below to learn how to alter the MTU settings on your Netgear router:

1. Connect the router to the power adapter, depending on the router you’re using.
2. Next, insert the power adapter into a wall outlet and turn the power switch on.
3. Check to see if your Netgear router is receiving enough power.
4. Establish a link between your router and modem.
5. You may connect your gadgets both wirelessly and with an Ethernet cable.
6. Finally, turn on your computer and open a web browser.
7. As long as your web browser is up to date, you are free to utilize it.
8. Instead of using the search bar, type 192.168.1.1 into the address bar of your web browser.
9. Pressing the Enter key will take you to the Netgear routerlogin.net website. 
10. Enter your Netgear WiFi router’s default login credentials and click Log In. 
11. Go to the WAN setup section once the Basic Home screen appears. 
12. In the MTU field, type a number from 64 to 1500.
13. Press the Apply button to save the changes you’ve made.

Quick Tip: If you’re having trouble altering the MTU settings on your Netgear router, start by changing it to 1400. Reduce the MTU from the maximum value of 1500 over time until the problem is resolved.

At The End

This was all about changing the MTU settings on a Netgear router login. We hope that the step-by-step instructions provided in this blog post were helpful. If you run into any problems while trying to adjust the MTU settings on your WiFi device, don’t hesitate to contact one of our professionals.

Note: Myrepeater.net is the web address for configuring or logging into wireless-n repeaters.